Just thought I would update you on my 04 clutch issues. By the summertime of last year I was having to add clutch fluid about once a month so I knew the slave was leaking. In Novenber I jacked up the truck in my driveway and pulled the trans. I installed a new Centerforce clutch, pressure plate, flywheel, Viper slave with Viper spacer, clutch master.
This cured the clutch issues for about a year. By then the trans was getting difficult to put into gear while stopped, mostly first gear and reverse. It became so bad that sometimes I had to turn off the engine, put it in gear and then restart!
I pulled the trans again and took it to Doug Levine, a local Viper car specialist and all around good guy. He had it rebuilt and upgraded with brass instead of Teflon on the selectors. Trans shifts much better now!
Currently trying to replace 02 sensors, if I can get the right ones from Dodge! Trying to do the two upstream ones, but they gave me two left , short ones. One worked on the left front side, and they other did not work on the front right side, so back to the Dealer I go...
Last edited by Suregrip; 10-14-2015 at 08:56 PM.