SRT10 Forum banner
1 - 20 of 59 Posts

· Registered
Joined
·
80 Posts
Discussion Starter · #1 · (Edited)
Sorry, this isn't exactly srt-10 related, but thought you might like to check out this hemi. http://dtw.truckmoxie.com/forums/topic.ten?pos=1&id=85045

Time Slip: http://dtw.truckmoxie.com/showownerpic.ten?u=4650&n=125903&pos=1&album=8251



This guy previously ran a 14.02, and had a video of his truck doing 14.05 if I remember correctly. He gets some really good launchs. Now, if a hemi can get 13.71, the srt-10 should be able to do a hell of a lot more then that, and it will as people figure them out. :)
 

· Registered
Joined
·
2,875 Posts
Toe said:
Sorry, this isn't exactly srt-10 related, but thought you might like to check out this hemi. http://dtw.truckmoxie.com/forums/topic.ten?pos=1&id=85045

Time Slip: http://dtw.truckmoxie.com/showownerpic.ten?u=4650&n=125903&pos=1&album=8251



This guy previously ran a 14.02, and had a video of his truck doing 14.05 if I remember correctly. He gets some really good launchs. Now, if a hemi can get 13.71, the srt-10 should be able to do a hell of a lot more then that, and it will as people figure them out. :)
dude, that was very cool. MOPAR BABY!
 

· Registered
Joined
·
174 Posts
Very impresive. Those Hemis are very restricted in the exhaust. It's the only way they're able to pass emmisions inspections here in CALI.
 

· Registered
Joined
·
70 Posts
i ran the 13.71 at 99mph in a 03 hemi loaded slt longbed with only $100 bucks in mods and i think theres more in my truck.....i only launched at 1500rpm because the track was cold and it was 9am in the morning if i could get some better tires then i should be in the 13.5s or better im still going to do some more cheap mods to get my times even lower.....just think what i could do with a srt10 with cheap mods i have been racing and doing mods for over 20 years i also have a 2001 ws6 trans am with a 6spd and im very good with the 6spd.....anybody need a tunner and a driver for there srt10 im the guy that will get the srt10 some very good times with very little cash in mods its also about the driver i also race bikes and run low 8s at 160mph....im real good with a clutch i drive a 6spd every day....everybody put the word out and lets get the srt10 some realy good times.... the sky is the limit
 

· Registered
Joined
·
34 Posts
Hemi Gtx

I picked a lime green 04 HEMI GTX last thursday i hope to will run that good,
 

· Registered
Joined
·
2,875 Posts
aint it funny how NONE of the svt guys have said any smart ass comments on this thread-yet. now that they have the hemi to worry about about, just wait until we have had as much time as them to figure our trucks out! :D
 

· Registered
Joined
·
180 Posts
BOOMER said:
aint it funny how NONE of the svt guys have said any smart ass comments on this thread-yet. now that they have the hemi to worry about about, just wait until we have had as much time as them to figure our trucks out! :D
Hey BOOMER, I know you & 9seconds are comin out with all you can find or make. I love it, you guys have a great jump for such a short time. and thats what makes the sport& for fun rivalry, instead of most of these keyboard racers that watched the fast & furious one to many times.. I'd never take away from someone who has put the time thought and work into getting thier machine hauling, and those of us that have been around a while also know you can get these newer vehicles movin if you dont always please the tree huggers :D So Hats off to Hemi777 and lets get some more closing the gap..
P.S. Idon't think 13.7 is getting any of those that make the comments worried.
 

· Registered
Joined
·
2,875 Posts
D Davis said:
Hey BOOMER, I know you & 9seconds are comin out with all you can find or make. I love it, you guys have a great jump for such a short time. and thats what makes the sport& for fun rivalry, instead of most of these keyboard racers that watched the fast & furious one to many times.. I'd never take away from someone who has put the time thought and work into getting thier machine hauling, and those of us that have been around a while also know you can get these newer vehicles movin if you dont always please the tree huggers :D So Hats off to Hemi777 and lets get some more closing the gap..
P.S. Idon't think 13.7 is getting any of those that make the comments worried.
COOL. time will tell, especialy when hemi777 gets a reprogramer & headers. and starts getting some serious mods on there.
13.7 should get some of the svt guys worried since he is now in their territory, not to mention he is a long bed moving more weight.
 

· Registered
Joined
·
34 Posts
Tmr

Hemi57 said:
pulling a TMR Wire (torque managment request) that makes the shift from 1-2 harder. takes about .3-.4 off the 1/4
I wounld like to know more about the (TMR) It is real lazy from 1 to 2, THANKS
 

· Registered
Joined
·
180 Posts
BOOMER said:
COOL. time will tell, especialy when hemi777 gets a reprogramer & headers. and starts getting some serious mods on there.
13.7 should get some of the svt guys worried since he is now in their territory, not to mention he is a long bed moving more weight.
Yeah, he should suprise some of the stock one's. "those" that like excuses, will probably say the longbed is a better wieght transfer advantage or something. And as always "BUt he's not stock" Well BOO fricken Hoo to them.
My additude is, I just want to play, and I don't care if I see your taillights, it'll give me a reason to mod more. :D
 

· Registered
Joined
·
50 Posts
You can't do the THR mod on a 2004 ram, it's a 2003 only deal. Not to mention it looks like Dodge knows all about it and checks for stored codes (even though it doesn't throw a light). If it's been done, regardless of weather it causes any harm, they will viod the tranny warranty. I still say its a good mod, lots of folks have been running it for a long time with no problems. There was one guy receintly who got pegged on it but it seems to be a pretty shady dealer that was working on the truck, who knows! Just do all the other mods and you should still be able to get down there in your times, if anything maybe the factory TM settings will help with launch (yeh right!)
 

· Registered
Joined
·
2,875 Posts
D Davis said:
Yeah, he should suprise some of the stock one's. "those" that like excuses, will probably say the longbed is a better wieght transfer advantage or something. And as always "BUt he's not stock" Well BOO fricken Hoo to them.
My additude is, I just want to play, and I don't care if I see your taillights, it'll give me a reason to mod more. :D
yep, great minds think a like-thanks mr davis! :D
 

· Registered
Joined
·
156 Posts
Hersbird said:
You can't do the THR mod on a 2004 ram, it's a 2003 only deal. Not to mention it looks like Dodge knows all about it and checks for stored codes (even though it doesn't throw a light). If it's been done, regardless of weather it causes any harm, they will viod the tranny warranty. I still say its a good mod, lots of folks have been running it for a long time with no problems. There was one guy receintly who got pegged on it but it seems to be a pretty shady dealer that was working on the truck, who knows! Just do all the other mods and you should still be able to get down there in your times, if anything maybe the factory TM settings will help with launch (yeh right!)
First of it's called the TMR mod. Its disconnecting one wire to the tranny. And no the dealer cannot tell if it has been done. People have even asked their dealer to check and see if anything showed up. Nothing has. Plus its not like the mod is permanent, you can reconnect the wire anytime you want to go back to stock.

TMR mods take off the torque management. It launches in first with full power (long burnouts), the shifts are firmed up a good bit. It is a very noticeable mod. I'd say about an .5 sec difference easy. You can't do in on the 04 as the ecm is different. Once a programmer comes out it will probably take care of it, plus give you the option to reload the stock program and keep everything thing "dealer friendly" when warranty issues come up.
 
1 - 20 of 59 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top