[Kennyr]

Hey all, does anyone have the Bilstein part numbers for the 4 shocks and the axle damper? I don't want to go as crazy a QA1's. Also, if anyone has used the Bel Tech shocks, are they any good on our trucks? I had them on a lowered truck years ago and they were great, but these are a different beast. Any other real world experience with other shocks and recommendations would be helpful.

Thanks,

KR

 

[HemiLonestar]

Factory service and parts manuals

2004 2004 Dodge Ram Factory Service Manual 2004 Dodge Ram Parts Manual 2005 2005 Dodge Ram Factory Service Manual 2005 Dodge Ram 1500 Parts Manual 2006 2006 Dodge Ram Factory Service Manual 2006 Dodge Ram Parts Manual

www.srt10forum.com

 

[Kennyr]

Sorry, I was looking for the new Bilstein part numbers. The original part numbers are discontinued.

Thanks,

KR

 

[HemiLonestar]

Should be able to use the previous OEM p/n's to find the new ones. I did this with an older SRT car.

 

[Bad Azp Performance]

Bilstien doesn't support our truck specifically anymore. The viper store lists some shock numbers but i haven't seen any proof they are valved correctly. The fronts dont feel as stiff as the oem front shocks the truck came with so I've had increase the front spring rate

 

[Bill505]

As a Dealer for Bilstein Shocks and Struts the characteristics of the Aftermarket Bilstein Shocks are NOT properly valved.

Utilizing the Shock Dyno the Rates and Effects of Rebound and Extension are Unique for SRT10.

The Used O.E. Shocks can be completely rebuilt and Shock Dyno Tested with Data Sheets.

However, Bilstein will not Repaint or perform any cosmetic procedures.

Currently a project is ongoing as to have the Shock Bodies Re-Powder Coated. Then ship Shocks for Rebuild and Re-valved

More Information to follow

 

[Bad Azp Performance]

P

As a Dealer for Bilstein Shocks and Struts the characteristics of the Aftermarket Bilstein Shocks are NOT properly valved.

Utilizing the Shock Dyno the Rates and Effects of Rebound and Extension are Unique for SRT10.

The Used O.E. Shocks can be completely rebuilt and Shock Dyno Tested with Data Sheets.

However, Bilstein will not Repaint or perform any cosmetic procedures.

Currently a project is ongoing as to have the Shock Bodies Re-Powder Coated. Then ship Shocks for Rebuild and Re-valved

More Information to follow

Please let us know

 

[R7urnm]

Hey all, does anyone have the Bilstein part numbers for the 4 shocks and the axle damper? I don't want to go as crazy a QA1's. Also, if anyone has used the Bel Tech shocks, are they any good on our trucks? I had them on a lowered truck years ago and they were great, but these are a different beast. Any other real world experience with other shocks and recommendations would be helpful.

Thanks,

KR

I've used it, and I think it's steady.