lowering kit & shifter orders

BOOMER · Feb 22, 2005

hey guys! i just sent out 6 lowering kits this morning & the rest will go out next week, as my spring supplier cant keep up! they are making the springs as we speak and we should have them by wed. of next week. the springs by the way are a MUCH improved version of stock, except these will eliminate body roll, which in turn improves your cornering ability~to really make a Furd lightning look bad in the twisties. these springs will also improve ride qaulity as well.
the shifters are coming along & those will be going out a week from this friday, if i would have known we won this trip a little sooner i wouldnt have planned it for now! wifey & I won a trip to Hawaii for 1 week so when i get back i will work day & night to get everyone's orders out asap.
keep in mind what you want in engraved on your shifters.
God bless, and if anyone needs me, i will try to check my email/pm's from over there.
by the way the lowering kits have the engraved Viper logo now inset with red to really make them stand out!

Hamrhead · Feb 22, 2005

That will work out good with me. I'll hang tight until you get back from your vacation to talk about a shifter. Have Fun!

QUICKSILVER · Feb 23, 2005

You are the MAN!

Have a great vacation!

Say hi to Patrick..aka maui/SRT10

Quick

womsterr · Feb 23, 2005

Can't wait to get it!

Milo55 · Feb 23, 2005

Gary enjoy your vacation man, We will wait!!!, hell its still snowing here anyway, GRRRRRRRRRRRRRRRRRR

womsterr · Feb 27, 2005

Got my kit on Friday. The quality of Boomer's work looks GREAT. I'll post some pics when its on.

Milo55 · Feb 27, 2005

Good Deal womsterr i will be waiting to see how it goes, Good Luck

Titan · Feb 28, 2005

womsterr said:
Got my kit on Friday. The quality of Boomer's work looks GREAT. I'll post some pics when its on.

How did the install go? Also hows the shifter working???

womsterr · Feb 28, 2005

Haven't done the install yet. Its cold as **** here in Atlanta and my butt ain't gonna lay in the cold rainy driveway

The shifters haven't shipped yet but I have spoken to boomer and they will go out shortly.

Having done a bunch of lowering kits on Rams I can tell you that putting on Boomers kit will be tits. The back should only take like 10 minutes. Put it on jackstands, ubolt the stock Ubolts (8 bolts - real easy when you use an impact wrench

) jack the rear up and slide your blocks in. Put it down and bolts her back up.

The fronts are fairly straightforward as well. On my Hemi the front bumpstops were welded on and I had to cut em off with an angle grinder. Not sure if we have to do that on his kit. The CNC blocks are WAY COOL.

BigDodgeInAlaska · Feb 28, 2005

womsterr said:
Haven't done the install yet. Its cold as **** here in Atlanta and my butt ain't gonna lay in the cold rainy driveway

HA! Well I guess we hit a warm spell this weekend, it got up to 34!! (Cold as **** in Atlanta, right!)

Sitedrifter · Feb 28, 2005

BigDodgeInAlaska said:
HA! Well I guess we hit a warm spell this weekend, it got up to 34!! (Cold as **** in Atlanta, right!)

I'm with ya. Although I live in NJ (by far from extreme cold state) , as long as it is 30 degrees out, it is warm (key word warm) enough for me to wash the truck

. Cold for me starts at 20 degrees

I do HATE snow though

Mark

Titan · Feb 28, 2005

womsterr said:
Haven't done the install yet. Its cold as **** here in Atlanta and my butt ain't gonna lay in the cold rainy driveway

The shifters have shipped yet but I have spoken to boomer and they will go out shortly.

Having done a bunch of lowering kits on Rams I can tell you that putting on Boomers kit will be tits. The back should only take like 10 minutes. Put it on jackstands, ubolt the stock Ubolts (8 bolts - real easy when you use an impact wrench ) jack the rear up and slide your blocks in. Put it down and bolts her back up.

The fronts are fairly straightforward as well. On my Hemi the front bumpstops were welded on and I had to cut em off with an angle grinder. Not sure if we have to do that on his kit. The CNC blocks are WAY COOL.

I should be getting my kit soon as well. When done I'll post some pics. Can't wait to test the shifter out

cornfed · Feb 28, 2005

installed my kit, was a breeze. rides and handels great. now waiting on bumpstops and t-shirt.

womsterr · Feb 28, 2005

Its 45 degrees her and raining. Thats DANG cold

BOOMER · Feb 28, 2005

cornfed said:
installed my kit, was a breeze. rides and handels great. now waiting on bumpstops and t-shirt.[/QUOTE]
crap, forgot the t shirt- i WILL send it out friday, sorry bubba. post a pic of your truck! thanks! :D :)

HDVIPER · Feb 28, 2005

cornfed said:
installed my kit, was a breeze. rides and handels great. now waiting on bumpstops and t-shirt.[/QUOTE]

Let's see some pics!!!

Hamrhead · Feb 28, 2005

Yeah, what T-Shirt???

Hey BOOMER, are you home by now? Me wants a shifter!!!!!

Milo55 · Feb 28, 2005

Hey Boomer, i didn't know we were going to get t-shirts, Cool

BOOMER · Mar 1, 2005

Milo55 said:
Hey Boomer, i didn't know we were going to get t-shirts, Cool

yeah, everyone gets t shirts, no problemo. i will be home by friday evening, t-shirts, lowering kits & shifters for everyone!

QUICKSILVER · Mar 1, 2005

Hi-Oh!

Quick

lowering kit & shifter orders

Top Contributors this Month