SRT10 Forum banner
1 - 1 of 1 Posts

4 Posts
Discussion Starter · #1 ·
2005 4 door Ram SRT10

Looking for any ideas:

Put in new pistons, rods, rockers, plug wires etc. started up fine but after warmed up and at correct idle, it began popping from what appears to be one cylinder. Checked wire placements, changed out that fuel injector. Still no luck. Looking for any advice.

Thanks in advance!
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.