SRT10 Forum banner

SRT-10 rear brake pictures.

3044 Views 7 Replies 5 Participants Last post by  9 seconds
4
For your viewing pleasure. I had it apart while Ben from Dilusi Motorsports took measurements. He had lots of thoughts on brake mods to allow the use of 16" wheels. I've given up my dream of 15's. Distance from thickest part of the brake caliper to the center of the axle is ~8 1/4". That makes even 17's tight with the stock setup. Ben commented that .050 clearance between wheel and caliper is all that is necessary. Be careful where you put the tape on weights.

Attachments

See less See more
1 - 8 of 8 Posts
those are some monster brakes!
Wikdsvt said:
those are some monster brakes!
MY WORDS EXACTLY
Doug McGill said:
MY WORDS EXACTLY
WTF dude. Bored? No Life? Trying to run your posts up. Jesus, take a chill pill and contribute when you have something contructive to say or informative. Not every post needs a response, and especially all from you in a 30 min time span.

No offense intended, but gee whiz.

Craig
I didn't know the rotor had a drum breaks also. Good info thanks :D
Titan said:
I didn't know the rotor had a drum breaks also. Good info thanks :D
I think more vehicles are moving to drum emergency brakes like these.
Ah! so their just for the emergency brake?
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top