SRT10 Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
45 Posts
I actually witnessed a situation like that @ the mall of GA 3-4 days before christmas. (I was just starting xmas shopping) It didnt quite get that bad, but funny as $hit.
 

·
Registered
Joined
·
2,891 Posts
BLS2DWL said:
I actually witnessed a situation like that @ the mall of GA 3-4 days before christmas. (I was just starting xmas shopping) It didnt quite get that bad, but funny as $hit.
i have done it. an ******* parked right up against me and there was an entire parking lot empty on all four sides of. in fact i parked out of the way. so i got in my truck, moved it. got out, proceded to kick the living **** out of his drivers side door. caved it completely in. it was the best therepy i have never got! needless to say it felt REEEAL good. my wife said the USMC did some **** to my head, but i say an eye for eye, a dent for a dent. ;)
 

·
Registered
Joined
·
1,343 Posts
Funnzzy

What makes that so funny is I have always wanted to do that for years. Had a 56 Ford PU. Just had it out of the shop with a fresh make the body straight job and new Imrom Paint. 3 rd day after paint I come out of a store and BIG MOMMA is setting in her 1959 Nissan Sentra with her drivers door open into my pass side truck door. She has the Defftone radio on and bouncing up and down to the music. Her door is riding up and down about 2 inches. Big scratch to bare metal. I confronted her about it and her comment was what is the problem "it's only an old truck." I had to leave or I would have gone to jail. That is why I don't carry a gun.>>>>>>>>>>Jack
 

·
Registered
Joined
·
1,803 Posts
*LMAO*, I think the women in the Stang is my wife! :D
 

·
Registered
Joined
·
974 Posts
womsterr said:
Just trying to liven things up a bit in here!

http://www.collegehumor.com/?movie_id=107711

Just noticed your sig. Do you have any pics? What kinda mods did you do to the engine?

"04 SRT-10 Silver #406 of 3,057 - 537.9 HP/598.9 TQ, Mods - Arrow Built Engine, Boze Forged Wheels, Magnaflow catback, RPS Clutch."
 

·
Registered
Joined
·
2,850 Posts
Discussion Starter #7 (Edited)
Just changed the sig today.

Those were the numbers from the bench dyno. It has just a port & polish, balance and blueprint with all new internals. I think Arrow just does a better job of putting these babies together with closer tolerances etc.

I'll be doing a chassis dyno before and after the K&N and I'll post what I come up with.

I'll finally have pics next week!
 

·
Registered
Joined
·
4,025 Posts
BOOMER said:
i have done it. an ******* parked right up against me and there was an entire parking lot empty on all four sides of. in fact i parked out of the way. so i got in my truck, moved it. got out, proceded to kick the living **** out of his drivers side door. caved it completely in. it was the best therepy i have never got! needless to say it felt REEEAL good. my wife said the USMC did some **** to my head, but i say an eye for eye, a dent for a dent. ;)

Boomer....I have really thought about doing that to somebodies car.......just to kick it so much it caves in the door panel......f -ing a, that would feel good sometimes..........thank God I have never had the opportunity....dont wanna go to jail when it becomes a fight and somebody gets really hurt...


great video!!!!!!!!!!!

patrick
 

·
Registered
Joined
·
107 Posts
private parking in Paris

I was watching TURBO Magazine ( French tv) on TV this morning and there is a guy in Paris who lends private parking lot (about 30 dollars a year / car). Only good looking / expensive beasts. The parking is located 30meters under a building, you acces it trough a common parking gate a go down till you reach an armored door with a guard. Only car owners knows the location of this "car safe", the only person who can enter an pick up the car is the owner, wife and kids wait outside. ...... no scratches or kids running around. I would definitly pay this money to park the beast when i go in town !!!!!!
 

·
Registered
Joined
·
1,343 Posts
Dyno It Please.

womsterr said:
Just changed the sig today.

Those were the numbers from the bench dyno. It has just a port & polish, balance and blueprint with all new internals. I think Arrow just does a better job of putting these babies together with closer tolerances etc.

I'll be doing a chassis dyno before and after the K&N and I'll post what I come up with.

I'll finally have pics next week!

I am really curious to see what it does with the PCM program that is in your truck. Can't wait to see data..............Jack
 

·
Registered
Joined
·
1,075 Posts
My friends know that I always park in the lower forty to prevent door dings. A couple of times some of my friends thought it would be funny to park inches from my car. I didn't laugh. That happened to my nephew the same way except that his "ex-friend" let the door slip and dinged my nephew's brand new truck. He wanted to take the guy's head off.

Besides, I park, finish my shopping and am driving away in the time it takes the soccer moms and little old ladies to sit, block traffic and wait for the perfect parking place.
 

·
Registered
Joined
·
599 Posts
Imron Paint?

Are you made at yourself? That stuff sucks!
 

·
Registered
Joined
·
1,343 Posts
That's all, it sucks.

Wikdsvt said:
Imron Paint?

Are you made at yourself? That stuff sucks!

In 1972 that was the best there was if you wanted a catalysed enamel. Remember that I am old.
(I recall when detergent oil came on the market. Before that dyno squeezins created sludge in huge quantities. But that was all we had.)
Imrom was hard like laquer but a lot tougher. There are better things on the market today, but then Imron was state of the art. In that era I was trying to be a state of the art kinda guy. Today I just want to be in the same state where the art is. Just remember that Social Security will just barley make my truck payment and with the reverse mortgage there won't be anything for little katie and Megan.
With that said I think I will go out back an buy a bullet, rent a gun and kill myself. Thanks Wikd you are really being a help this morning........Jack
 

·
Registered
Joined
·
966 Posts
That was hilarious!

womsterr said:
Just trying to liven things up a bit in here!

http://www.collegehumor.com/?movie_id=107711
I had something similar happen to a friend of mine. don't remember the year of his Ford Bronco, (early 70's boxy, blue and whilte) but he just got done having it painted etc. We took our dates to a move theater..the parking slots were wider than normal, and yet some A-hole still parked very close to the Bronco. Needless to say, there were some scratches from the four door car on my friends Bronco. Naturally, my friend was pissed and he took his freshly painted driver side door and slammed it into the other vehicle a multitude of times! It was like he was temporarily insane...It was almost like he was a person who developed a steel plate in his head, temporarily...Anyway we took the Bronco back to the body shop...We asked if there was any kind of warranty on the body/paint job.
We laughed afterwards but at the time...It was almost kill time... :D
 
1 - 14 of 14 Posts
Top