SRT10 Forum banner

1 - 20 of 1954 Posts

·
Premium Member
Joined
·
6,854 Posts
Discussion Starter #1 (Edited)
How bout a thread showing what you did/got done to your truck today?? I'll go first...

Today I ordered (all from Tony):
1. Billet polished wheel center caps
2. Coils, wires, sleeves, billet wire spacers
3. 3-gauge A-pillar pod (Fuel Press, A/F Ratio)
4. fuel fitting to plumb in the AutoMeter fuel pressure gauge
5. Caltrac traction bars
6. Rear leaf spring Poly bushing kit

Also tested the rear-view camera, thinking of drilling a small hole on the rear valance just above the hitch if there's room behind it to mount the camera. The picture on the screen of the RB1 is better than I hoped it would be.

Also shot some better photos of the new Toyo Proxes tires on the back of the truck using the brand new Coolpix S640 digital camera that arrived today, but haven't downloaded them yet.
 

·
Registered
Joined
·
1,891 Posts
Tuesday I installed a Mag-Hytec trans pan, with autometer temp gauge (got it used from a member on the other forum), also installed a dual steering column gauge pod that I got from the Stank man.
 

·
Premium Member
Joined
·
6,854 Posts
Discussion Starter #3
Tuesday I installed a Mag-Hytec trans pan, with autometer temp gauge (got it used from a member on the other forum), also installed a dual steering column gauge pod that I got from the Stank man.
:popcorn: How bout some photos?
 

·
VIPEROLIGIST
Joined
·
13,625 Posts
I did some photoshopping and updated my website with some additional pictures of Loosey
 

·
Registered
Joined
·
155 Posts
I installed a brand new very very high dollar air freshener.:booty: I want to give her a bath:bad: if this weather ever breaks, lots of melting snow and ice. Which means alot of salt on the truck. Actually I have a subwoofer and wiring waiting to be ran when weather is better. Other than that just general maint. Peace Kevin
 

·
Registered
Joined
·
578 Posts
i didnt do anything but tony spent a lot of money on mine's behalf
 

·
VIPEROLIGIST
Joined
·
13,625 Posts
Hey Eddie.....

Time to update that Avi

I know you have a Black Beauty

V2
 
Joined
·
8,725 Posts
i didnt do anything but tony spent a lot of money on mine's behalf
I shook the leaves off the cover, and peeked under to see if santa elves had installed an engine yet,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,and jsut dropped the cover:crying:
 

·
Registered
Joined
·
1,069 Posts
Ordered, got some already and the rest on the way ...

CalTracks - Tony = To powdercoater sat. - Red
Cal-Vues - Ordered & Painted by Tony and Company - Red
Polished center caps - Tony = To powdercoater sat. - Red, Black, or Gold ?????
1.5" Front end Drop Kit - Tony
JMB lowered end link powdered kit - Justin
Under Hood Caps & covers at powdercoater - Gold
Under Hood Strut Covers - Billet
12" X 4' roll up bed cover, Cover - at powercoater Black
Hopefully all done and installed by middle of March.

Jim
 
Joined
·
8,725 Posts
Saw this thread at the other site, loved it, wanna try it here?

Today I ordered (all from Tony):
1. Billet polished wheel center caps
2. Coils, wires, sleeves, billet wire spacers
3. 3-gauge A-pillar pod (Fuel Press, A/F Ratio)
4. fuel fitting to plumb in the AutoMeter fuel pressure gauge
5. Caltrac traction bars
6. Rear leaf spring Poly bushing kit

Also tested the rear-view camera, thinking of drilling a small hole on the rear valance just above the hitch if there's room behind it to mount the camera. The picture on the screen of the RB1 is better than I hoped it would be.

Also shot some better photos of the new Toyo Proxes tires on the back of the truck using the brand new Coolpix S640 digital camera that arrived today, but haven't downloaded them yet.
all shipped out but number 2, those will ship out next friday or should.
all the other you should have monday good sir
 

·
Premium Member
Joined
·
6,854 Posts
Discussion Starter #12
Man, Tony must have his own Fed-Ex driver. I ordered my parts yesterday, hoping they'd show up as early as Monday (I'm off Monday) so I could intercept them before the Mrs saw them. They arrived today, my wife accepted them without questions while I was out Walmarting with the kids. She is so good to me... If she saw they cost over $1000 though, might have been a different story.
 
Joined
·
8,725 Posts
Man, Tony must have his own Fed-Ex driver. I ordered my parts yesterday, hoping they'd show up as early as Monday (I'm off Monday) so I could intercept them before the Mrs saw them. They arrived today, my wife accepted them without questions while I was out Walmarting with the kids. She is so good to me... If she saw they cost over $1000 though, might have been a different story.
lolol only person I know that orders at 2 am:scared1::booty:
 

·
Premium Member
Joined
·
6,854 Posts
Discussion Starter #14
Oh yea?? Well, you're the only vendor who replies at 4am!! Got he back-up camera installed tonight (no good places to install it without seeing it), was starting on the Plasmaglow LED bar (I go tthe first of a "New and Improved Design" batch, it works wonderfully, now to install and wire.






If anyone has been curious what the fuel fitting looks like that Tony sells to install a Fuel Pressure Gauge, well, here it is, complete with the electric Autometer sender already attached.

 

·
Site SUPER Moderator
Joined
·
6,681 Posts
Tom, once again, great job and it looks nice too... :)
 

·
Site SUPER Moderator
Joined
·
6,681 Posts
And that's a Bad Thing??? :D

Welcome to everyone of them.... More Fun :) :) :) More Knowledge :) :) :) More Ideas :) :) :)
 

·
Premium Member
Joined
·
6,854 Posts
Discussion Starter #18
Tony gets my truck tomorrow for the "Hood" mod, I'm already going through withdrawals again. I don't know how you do it Sandy...
 

·
Site SUPER Moderator
Joined
·
6,681 Posts
I have the 300C SRT-8. Without it I would have my hands around the dealers neck... :)

Wolf comes back from the shop tomorrow afternoon. The parts took longer to get in than was expected and he started it on Sat and finishes the rebuild tomorrow. :D

Anybody know the "Correct" amount of gentle driving required on a Tranny Rebuild????
 
1 - 20 of 1954 Posts
Top