SRT10 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1 (Edited)
I need to remove my wing to haul a riding lawn mower tomorrow. Is it as straight forward as removing the 2 screws? I have a 2005 QC.

Thx
Richard
 

·
Registered
Joined
·
77 Posts
it's straight forward. look at the directions in the pouch with the tools you need. it should be with your jack under the passenger's seat
 

·
Registered
Joined
·
4,025 Posts
Rer3, just remove the two bolts from under the bedrail.....ya dont want to take off the two on top of the bedrail!!!!! They are kinda tricky to put back on......of course you dont need to take them off to remove the wing at all, just wanted to share the tip. After you remove the lower bolts you just kinda nudge the wing to the rear, then lift up and off....there should be some directions with the tool they give you.


patrick
 
1 - 4 of 4 Posts
Top